|
|
||
  
|
This page provides access to many photos of the CN2R contest station in Morocco. The photos show a history of the changes made to improve the station's performance. Drawings that were used to design and construct the station's towers and control systems are also featured. The pages are organized by subject categories. The available categories are listed below. Clicking on the photo or the hyperlink brings you to the listed subject photos and drawings |
 |
STATION DESIGN The 3 towers are positioned in a 60 Meter triangle. They are labeled as the East West and South towers. |
 |
TOWER MANUFACTURING The 3 towers were all manufactured in Morocco |
 |
EAST AND WEST TOWER ERECTION The first two towers were installed in an 8 day period. |
 |
SOUTH TOWER ERECTION The tower is 45 Meters high. This tower was painted prior to installation. |
 |
YAGI CONSTRUCTION Yagi construction started in the spring of 2002. |
 |
YAGI INSTALLATION Yagi installation started in August of 2002.
|
 |
VERTICALS The station has 2 verticals. A 160M shunt vertical and a 80M vertical. |
 |
RX ANTENNAS Receive antennas consist of 2 K9AY Loop antennas and 2 beverages. |
 |
SIDEMOUNTS Sidemounts were used to reduce the number of towers |
 |
FEEDLINES There are ~30 feedlines. Most feedlines are H1000 Coax. All RF switching is done inside of the shack. |
 |
SWITCHING AND CONTROL
DESIGN Diagrams of the interface boxes and circuits used to help automate the station. |
 |
SWITCHING AND CONTROL Photos of the interface boxes and circuits. |
 |
SHACK INTERIOR The Radio Shack construction was finished in Sep. 2002 |
 |
SHACK EXTERIOR Construction of the Radio Shack started In August 2002 |
 |
HELPERS A few photos of the people who provided all of the construction help at the station. |
|
This page was last updated 01/10/07 |