 |
160 Meter Shunt vertical feed and tuner box on West tower. |
 |
The 50 ft shunt wire can be seen below the bottom yagi on the left side of
the tower |
 |
The tuner uses 2 vacuum caps for covering the band |
 |
One of the capacitors is driven by a small 12 volt motor for QSYing. |
 |
The 160M shunt vertical control box is the little box on the table with the
up/down red buttons. |
 |
This diagram shows the 160M tuner and shunt wire. |
 |
A view of the 80M vertical from the East Tower |
 |
The feedline and mounting hardware for the 80M vertical. |
 |
The 80M vertical is elevated about 10 feet. It is a full 1/4 wave. |
|
|
