CN2R Shack Interior
Home
Up

This page contains photos of the CN2R shack. The shack operating positions consist of 2 operating tables. These operating positions are known as the Left and Right tables.  Click on any picture to view a larger image or use the Slide Show link below to view all pictures in a separate window

Slide Show

  Construction of the Radio Shack was completed in Sept 2002.This was my first view of the shack. CN2R shack October 2002. First contest with a SO2R-- ACOM 1000 an Yaesu ft1000MP
Left table operating position Mar 2003. Antenna control allowed 2 driven antennas per band. This photo shows the empty operating table. All radios and amplifiers are stored off-site after the contest.
October 2003 shack. Added LCD monitors, Emtron amplifier and the third tower. November 2003 left operating position. Added more antennas and ACOM 2000
Mar 2006 Left position. dual monitor, Better low-band RX antennas. three transmit antennas per band. Right operating position Nov. 2003. Yaesu Ft1000MPMK5, Kenwood TS940S, MLA 2500 amplifier and 6 Meter KW
Nov 2005 Right operating position. Added AL1200 amplifier. CN2KM set CQWW CW SOSB 20M from this position. Mar 2006 right position. CN2SD operated the CQWPX test as SOSB 20M. An LCD monitor was added to this position.
Trophy for CN2R CQWW SSB SOAB 2004 High power Winner! Main Left operating position with Bigali paddles and full-travel small keyboard.
Oct 2004 antenna control muxed a Cushcraft A3s between 10/15/20. This allowed 3 direction TX/RX. Oct 2003 antenna control added a stackmatch for each of the 6 bands. The RAS8 control and K9AY control are also shown
Prositel rotors and ICE 419 bandpass filters driven by Top Ten sync/source band decoders 160M/80M antenna control. The 3 switches allow operation from 1.800 - 1.900 Mhz on 160M rotating dipole
ACOM2000 amplifier (4cx800) AL1200 amplifier (3cx1200)
 

Home | Links | Feedback

This page was last updated 08/31/06