 |
All guy anchor holes were manually excavated. |
 |
This is a finished guy anchor with the first guy attached |
 |
The guy anchor orientation is aligned to the tower base. |
 |
Tower sections were checked for alignment using the black pipes. |
 |
Each tower section was raised manually by 3 or 4 local Moroccans. |
 |
The 2 inch OD 5 meter steel mast was preloaded after the first 2 sections. |
 |
Guy wire hardware used for tower attachment. |
 |
A few holes had to be modified in the tower sections. |
 |
West tower partially erected to 18 meters |
 |
1.2 meter pipe stands were used to fit the thrust bearings and rotator. |
 |
Guy detail for the Philystran guys. The Towers are guyed with the Kevlar
non-conductive guy cable. |
 |
Two Rolls of H1000 semi-rigid hardline. Each roll is 500 meters. |
 |
Cable reel used for the rotor and coax cable. |
 |
Prosistel Pst51 rotator. These rotors are used to turn the top and sidemount
antennas. |
